A & E Lab.
Main Products: Atomic Absorption Spectrometer (AAS), Fluorescence
Spectrophotometer, Bio-Spectrophotometer, UV Vis Spectrophotometer,
Visible Spectrophotometer, Flame Photometer, Whiteness Meter,
Turbidity Meter, Colorimeter, Gloss Meter, Tintometer, Automatic
Polarimeter, Auto Melting Point Apparatus, Automatic Refractometer,
Abbe Refractometer, PH/DDS/TDS Meter, etc.
CONscan series Waterproof Pocket Conductivity Tester
CONscan series waterproof pocket conductivity tester include the
CONscan20, 30 and 40. The meters are used to measure electrical
conductivity value of liquids without temperature compensation
CONscan20 is used to measure low conductivity liquids.
E.g. Pure water, Distilled water etc.
CONscan30 is used to measure general conductivity liquids.
E.g. Tap water, Table-water etc.
CONscan40 is used to measure high conductivity liquids
E.g. Waste water, Salt water etc.
Single Point Push-Button Calibration:
CONscan series with one point calibration function. The meter is
permitted to use user-defined calibration solution, you need only
set conductivity value in meter and immerse the electrode into
standard solution, then press CAL key, the meter will be calibrated
The meter with hold function, press HOLD key, you can freeze
reading temporarily for easy viewing.
CONscan series with platinum sensor, giving you quick, reliable
conductivity measurement. Double junction sensor, you can replace
CONscan series will turn itself off approximately 8 minutes after
last key pressed, it saves battery power after non-use.
The meter with good waterproof performance, It can float on water.
1 point (Digital, push-button)
8 minutes after last key pressed
3—1.5V alkaline button cell batteries
Approx. 150 hours
Dimension & Weight
180(L)mm—30(Dia.)mm & 85g